Tips How To Change Your Boat Oil

Just like cars, boats need to have their oil changed. Four-stroke outboards, inboards and stern drive boats require regular oil changes. Follow these quick steps to change your boat oil.

Steps

1. 1 Determine how often you should change the oil. The frequency will vary by model, but a good rule of thumb is to change the oil every 100 hours of operation or at least once a year.
2. 2 Decide whether you should bring your boat to a dealer or do it yourself. Unfortunately, there aren’t any quickie oil change shops for boats, so you have to change your boat’s oil yourself or take it to your local dealer.
3. 3 Learn that if you decide to go it alone start the engine to warm it up.
   
   
   • Turn off the engine.
   • Remove the drain plug.
   • Drain the old oil.
   • Change the filter
   • Replace the drain plug
   • Fill the engine with new oil, using marine grade oil. Boat engines work much harder than car engines and automotive oil isn’t made to protect marine engines.
   
    Thanks :)
   Please Always Visit Our site at tentangautomotive.blogspot.com

An All-Informative Guide About New and Used Trucks

"Trucks are one of the most frequently used vehicles for transporting cargos and passengers from one place to another and though they differ greatly in terms of size, power and configuration, they can be personalized as per one's requirement and usability."

Trucks have become a vital part of our lives when it comes to transporting people and cargo from end-to-end. Trucks are available in different sizes and configurations and are usually powered by diesel engines, although gasoline engines are also available in the American market. Unlike old times when trucks were only used as a transport vehicle, the modern SUV and pickup vans are available with the latest features such as touch-screen navigation, DVD players, Bluetooth connectivity and satellite radio amidst others. Both new as well as used trucks are easily available in the market at varied prices and can be customized as per one's need and requirements.

While the trucks have been in use for long, it was during the 1920s after the First World War that the industry witnessed a major boom and drivers even started to make a living out of the truck business. Trucking companies started increasing in number as the demand for transporting goods from one corner to the other went up and while some of them saw losses during the Depression, those who could survive witnessed a boom from the reviving economy. In 1935, Congress passed the Motor Carrier Act which tried to regulate the trucking industry and laid down certain policies for doing so. Though the trucking companies were primarily concerned that these policies will curb their business, yet road infrastructure became better and the industry witnessed growth with the rise in demand.

Truck manufacturers saw an increase in sales during the war as defense contracts promoted heavy-duty vehicle production on behalf of the war efforts. Ford, Dodge, and Chevrolet all re-entered the market with newly styled models that featured modern styling and progress in comfort and engineering. Truck transmissions evolved with time and more and more companies entered the business with the American trucking industry leading ahead of the European industry. Nowadays, with the domestic sales industry reaching out to a wider international audience, the trucking industry still remains an essential means of transport in the 21st century as well.

When you think of trucks, whether new or used ones, there are certain well-known brands such as Volvo Group, Ford, Dodge, Fiat Group, Toyota Group, Nissan, Tata Group, General Motors, Volkswagen and Daimler AG amongst others who are known for their heavy-duty as well as light commercial trucks. Names such as Ford F-150, Chevrolet Silverado 1500, Toyota Tundra, Dodge RAM 1500 or 3000, Nissan Frontier, GMC Sierra 1500, Chevrolet Colorado, and Ford Ranger have become an essential part of the trucking industry. Both new as well as used models of these trucks are extensively used for different purposes and are available with certified dealers at attractive discount rates.

Modern pick-up trucks are no longer as bulkier as their conventional predecessors and have now packed carlike comfort, high-end features and versatility which makes them the most preferred vehicles in the American market

Thanks :)
Please always visit Our site at tentangautomotive.blogspot.com

Save Money on Used Motorcycle Parts

For every motorcycle enthusiast, it is indeed very taxing to maintain bikes as good as new - its engine running and all its other parts functioning. We know for a fact that it's not only for the sake of transportation but also for a little satisfaction of our vanity - seeing everyone admire us, atop an excellent piece of machine. Like any road going vehicle, a motorcycle's performance is based on the smooth running of thousands of parts, large and small. It is a nuisance indeed to find some faulty parts on a vehicle and prevent owners from enjoying its full use.

Broken parts on a motorcycle can spell tragedy for its driver and extensive damage to the machine. In a motorcycle, the safety and security provided by a four wheel vehicle on each corner doesn't exist as such, when its rear wheel locks up at 70 mph it could skid out of control and throw its rider. What's more heartbreaking is to know that the cause of the accident is because of a broken part.

The best solution is to always have a replacement part handy in order to have extra parts for those which have been damaged or lost. Having ample budget for this would, however run risks for your pocket. If you do not have sufficient budget to afford the high costs of brand new replacement parts but afraid of scratching around for used motorcycle parts from questionable origins and warranty, don't fret. There's still a way for you to save money by buying used motorcycle parts and prevent you from living your worst nightmare.

Yes, indeed! Buying used motorcycle parts are a great way for you to save money and keep your bike going splendidly. There are just some pointers or guidelines for you to remember once you have decided that your budget leaves you little choice between brand new and used motorcycle parts. By following several general guidelines, you could still acquire used motorcycle parts that are in tip top shape, good condition and will not be the cause of your bike getting torn apart.

First of all, when scouting for used motorcycle parts, especially online, make a point to double - check, there are things to look out for, consider and avoid. Don't ever miss out on crucial details, like, how old can the used part be? How compatible will it be to your bike's model and make? Next, it is understandable to be skeptical, after all, the World Wide Web is full of BS and scams. You have to be careful to avoid those who make stupid claims that expect you to believe them. It is but your right to verify and countercheck the validity of everything that they are offering you and once you have placed an order, as much as possible, give certain conditions for your purchase. Something that may go like, they will have to show you if the purchased part functions upon getting secured on your bike. You could also inquire for warranty periods.

There are ways to save your money and still get above-average used motorcycle parts. Just be wise enough once you decide to be practical and economical.

Thanks :)

Please Always Visit Our site at tentangautomotive.blogspot.com

Some Tips How To Improve the Performance Your Motorcycle

Taking your bike to the next level of performance does not mean that you need to know master all the technical secrets. There are 3-basic approaches to improve its performance. The simplest approach is to ensure that your bike is working appropriately.

1. By taking better care and switching over to superior quality oil, you will get improved gas mileage, power and handling.

2. Another approach is to link the power with the performance and modify the bike accordingly, so that the horsepower is more than the factory set power.

3. Customize the motorcycle based on specific functions like racing, cruising, off-roading, etc. The racing bike has its own characteristics, which is not same as the touring bike.

You can apply all the approaches on the same motorcycle. However, not many riders would like to change the performance that their bike originally gives.

Simple Ways to Enhance the Functioning of Your Motorcycle

You need to follow a few simple steps to improve the performance without any major modifications.

1. Properly Inflate Tires: If the tires are too full, it makes the bike difficult to handle. However, if they are not full, it leads to poor fuel efficiency and poor handling. 34-38 PSI is ideal.

2. Check Tire Tread: Check the tires frequently and replace them if the tread is worn out. Worn tread, especially if it is uneven leads to poor handling.

3. Regulate throttle cable length: The motor response will be quick, but it cannot be controlled easily if the slack is too little, or if the slack is too much. Then it will not respond swiftly.

4. Lubricate cables, control pivots and replace worn out cables - With proper lubrication, the controls will become more responsive.

5. Set suspension sag - It is important to balance the rear and front suspension systems, without which the handling will be poor.

Motorcycle Oil Filter

6. Use high quality filter or motorcycle specific oil - Good quality and clean oil will help the engine run cleaner. Besides changing the oil, also change or clean the filter when required.

7. Lubricate and adjust the chain - Handling will be poor and the bike loses horsepower, if the chain is dirty or rusty. Also, loose chains can break easily.

A Few Other Points to Consider

Some of the basic changes like getting a brighter headlight or a comfortable seat will also help you get the most out of your bike. Besides increasing the visibility for the rider, a brighter headlight will also make them visible for others.

Louder horn is another good safety precaution. Few riders choose loud engine, so that the truck and car drivers are aware about them. However, it is not necessary for a bike to have a loud engine, in order to be safe on the road.

It is possible to alter the engine in order to have more power, provided that you take care of the above-mentioned basic requirements. These steps can easily increase your motorcycle performance. You can also learn motorcycle repair through step-by-step instructions available online.

Motorcycles are fun. Every rider wants the most powerful and the best machine possible. Some people enjoy upgrading and maintaining their bike. Someone with less skill can also customize the bike, with the help of a professional mechanic.

Thanks For Visiting Our Blog.

Please Always Visit Our site at tentanguatomotive.blogspot.com

This Is The Reason Why Important To Change Your Oil

Doing regular maintenance to your vehicle is very important, and it will help you keep your vehicle on the road longer and running better, but why is oil the one we have to change so often? I mean no other fluid or part of the car has to be changed every 6 months of 3 thousand miles. You add gas more often probably, but that doesn’t require a mechanic or a special waste process.

Let us think about how the engine works. Your engine has a lot of metal parts that work together to push your car forward. We should review the most important ones.

Cylinders – Most cars have 4, 6, or 8 cylinders and some random cars have 3 or 10, but what do they do? Well, the cylinder is a space inside the engine block where gas and oxygen mix and eventually combust.

Pistons – They fit inside the cylinder and are what is used to suck in the gas and air mixture into the cylinder, and then compress the oxygen and gas mixture to create an explosion. Cars have a 4-cycle process to make the engine work properly. For the 1st cycle, the piston will slide down the cylinder and suck in the gas and air mixture. The 2nd cycle is to push it back up and compress the gas and air mixture inside the cylinder. The spark plug will ignite the mixture, which pushes the piston back down making the 3rd cycle. The final and 4th cycle is when the piston moves back up to push out the combusted gasses. There are two up and two down steps to complete the entire piston combustion process, which reaches 4-cycles.

Valves – Engines require gas and oxygen to mix and then explode to push the car forward. The valves are positioned at the top of the engine above the cylinder and help control how the mixture gets into the engine, but also provides a tight seal so the pistons can compress the gas and air mixture in the cylinder. The valves move at an extremely fast pace to make sure there is always a tight seal.

Camshafts – The valves mentioned above need to be opened and closed at a very fast pace with precise timing. This is accomplished by connecting them all to a rotating camshaft. The camshaft has multiple grooves with different heights that are custom made to match the speed of the pistons. This prevents the valves from colliding with the pistons and damaging the engine

Crankshaft – This is main metal rod that runs through the center of the engine and connects everything together to push the car forward. When an explosion in the cylinder pushes the piston down, it turns the crankshaft. The crankshaft is connected to your transmission and is what connects the engine power to the rest of the car and makes the wheels turn.
Now all of these parts work together to make your car move forward, but they are also all made of metal. If you were to take two pieces of metal and rub them together at thousands of passes per minute, you would create a lot of friction. This friction will create heat and start to soften the metal, and cause it to stick together. Imagine if all of this metal was rubbing together inside your engine with no lubricant.

This is where oil comes into the equation. The oil in your engine prevents the metals from coming in direct contact, and reduces the amount of friction that have with each other. Obviously this prevention of friction is also preventing your car from seizing up and stopping. If you tried to run a car with no oil, it would only take a few seconds for the engine to seize and become locked together.

But why do we have to change the oil so much? Well, oil in your car is being exposed to extreme conditions all the time. It will eventually breakdown and get filled with gunk. Your engine is creating an explosion every 100th of a second, and this explosion leaves behind burnt gas and air particles that get trapped in the oil. Your mechanic would call this gunk or sludge. You can tell if your car has gunk when your oil is a dark black color. Trust me, it did not go in your car that color. Fresh oil is a clear gold, like a less brown maple syrup.

In conclusion, oil is the most important fluid to keep your engine working. It provides the lubrication all the metal pieces need to keep moving. If you don’t change your oil it will break down and get filled with gunk, and eventually slow your engine down. Old oil will make your car work harder and create more stress on its parts. That means things break faster, and you burn more gas, hence why you have to change your oil so often.

Thanks.

Please Always Visit Our Site at tentangautomotive.blogspot.com

Do You Need To Change Your Tyres And Mag Wheels Regularly ?

In this day and age, there are a variety of cars in terms of design and style. Then there are those cars that are designed with the young man in mind. These are usually the fast and sporty types of cars which young men love to modify to suit their style and personalities. This can be a fun endeavour which is coupled with creativity. In most cases, the mag wheels are the first thing that is changed in order to give the car a new look because the right set of mag wheels can uplift the style of the car instantly.

Besides aesthetics, when do you need to change your tyres and mag wheels and do you need to replace them regularly?

If you want a larger surface area to grip the road, you'll need a wider or bigger tyre. Hence you'll need a bigger wheel. You'll have to check that the specific tyre and wheel that you purchase is suitable for your car and has the correct fitting sizes to fit onto your car. There's no point procuring a mag that just won't fit on your car.

If the mag wheel is damaged, this is a tell-tale sign that it needs to be changed. It is quite reckless and dangerous to drive with a damaged mag wheel. If it has any kind of hairline crack or large visible damage, take your vehicle to your nearest wheel and tyre fitment centre. You don't want to drive long distances with such a damaged wheel.

If you drive into a pothole too fast, too hard or at a bad angle then your tyres and wheels could be irreparably damaged. This type of accident could cause the wheel to buckle and unusable to the point that you possibly are not able to drive to the nearest fitment centre. In this case, your car will have to be towed then the wheels and tyres have to be replaced.

Most wheel and tyre fitment centres sell a range of alloy wheels. These are quite durable and reliable as it is able to endure various conditions such as rain, dry conditions, dust and much more. However, you need to take care of the mags too. You have to clean it regularly, weekly if possible.

If the tyres and wheels are still in good condition, you could drive with them for many years so you don't have to change them regularly. But when they do get damaged in any way, it is essential that you go to a wheel and tyre fitment centre to have it replaced right away.

Minty's is amongst the leading tyre suppliers in South Africa, and is recognized for our high standard of customer service. We have built a reputation amongst our customers and ensure that they receive tyres and alloy wheels of the highest quality, amongst the largest brands nationwide.

Thanks.
Please Always Visit Our Site at tentangautomotive.blogspot.com

7 Car Maintenance Tips Every Girl Should Know

Check your tire pressure! 

Right, I know that’s important—and yet I’ve no idea how to put that thingy on my tire. (Do I even own one?) I watch the girl in The Fast and the Furious with slight awe.

We’re powerful women, we juggle jobs, sports, cooking, kids, and even our cars. Maintenance can be intimidating, but it’s not as hard as we think. Here are 7 tips that every girl can do to make sure her car is in tip-top shape.

1. REFILL WINDSHIELD WIPER FLUID

Sure, you’re supposed to have this “taken care of” for you with your oil change. But especially if you live in an area with lots of snow, it’s important to make sure you don’t run out. If the light turns on showing you need more, open the hood and look for the washer indicator to know where to add the fluid. It’s also smart to have a jug of it in your trunk for emergency refills. You can go through quite a lot of it driving in a snow storm.

Car maintenance isn’t overwhelming with these quick tips from Fuelzee.

2. REPLACE YOUR WIPER BLADES

More than once I’ve had someone ride with me and ask “How can you drive with blades that bad?!” When you feel tension looking out the windshield or you find yourself squinting because the wiper blades are doing a poor job, it’s time to change them out. Don’t stress yourself out wondering which ones to buy. Most auto stores actually have a guide for you! The packaging usually comes with directions right on it too. If you’re nervous changing them out for the first time, just ask for help in an auto store.

3. CHANGE A FLAT TIRE

Flats happen. It’s part of life. So avoid the anxiety you’ll feel when you hear that ominous “bump, bump, bump” and instead make sure you’re ready ahead of time. Do you have a spare tire or a temporary “donut” in your car? If not, get one pronto. Also, get a tire jack and iron. Changing a tire is not complicated, but having someone run through it ahead of time with you (even if that someone is YouTube) can make you feel more calm in the moment.

4. GIVE A JUMPSTART

Maybe you left the lights on, maybe your battery is just old. Sooner or later you’ll be faced with a dead battery. Make sure the problem really is the battery first. Check the headlights and other interior lights and see if they are dim. Check the manual for the location of the battery. (Some cars put them in the back.)

• Park the cars facing each other and turn off everything in them both.
• Connect the positive terminal (+) with the red wire on the dead car.
• Connect the positive terminal (+) with the red wire on the car with a good battery.
• Connect one black clamp to the negative (-) terminal of the good battery.
• Connect the other black clamp to a piece of grounded metal on the dead car. (Look for a bolt where the thick negative cable from the battery connects to the car. If you can’t see this, usually a nut, bolt or other protruding shiny metal will work.) You may see a small spark when you connect to a good ground.
• If you can’t find any nuts or bolts to connect it to, you may connect it to the negative (-) post of the dead battery. (This risks igniting hydrogen gas, so it’s last choice.)
• Start working car.
• Start car with dead battery and let it charge about 5 minutes.

5. CALL A TOW TRUCK

Do you have AAA? Does your insurance company offer roadside assistance? Many car insurance companies offer this for just a few dollars a month.

If your car breaks down, turn on your hazard lights and get your car safely off the road. Then call for assistance or a tow truck service. Take a few minutes (yes, right now!) to make sure you program the number for a tow truck or your roadside assistance into your phone. Also, take time to put in your mechanic’s name and address. If you don’t have a mechanic, think about where you’d want your car taken in a breakdown. Home? Your brother’s house? A mechanically-minded friend?

6. CHECK YOUR OIL

Oil changes are so economical these days it’s not really a bargain to do it ourselves. However, you should still know how to check your oil. And where to add more oil if your engine is running hot and you need some.

7. CHECK YOUR TIRE PRESSURE

Tire pressure is important. If your tires are under-inflated or over-inflated you’ll drain your gas mileage and risk accidents. DMV.org has a great explanation of PSI and how to make sure your tires are correctly inflated. Always carry a tire gauge in your car. Also consider carrying a can of air, just incase you can’t get to a station or don’t have the change for the machine in a pinch.

If you don’t know how to do all seven of these maintenance tips, now’s a great time to learn! Let 2015 be the year you take power of your car maintenance. You’ll feel incredibly proud knowing you’re able to care for your car on your own.

 

Thanks .

Please Always Visit Our site at http://tentangautomotive.blogspot.com